Hello everybody,
I've been looking thru the forum, but cannot find it.
I have this valve:
It's a 2wires, how do I connect it? I mean pin 1 is FIDLE output or pin2?
thanks for your help.
Bosch 2 wires Idle Valve
Moderators: jsmcortina, muythaibxr
-
- Experienced MS/Extra'er
- Posts: 371
- Joined: Mon Mar 27, 2006 6:56 am
- Location: London
- Contact:
Bosch 2 wires Idle Valve
Ford 342 stroker | 4inj.TBI
MS2/Extra beta RC3 2.1.0 20090611
MS2/Extra beta RC3 2.1.0 20090611
-
- Super MS/Extra'er
- Posts: 2413
- Joined: Sun Mar 06, 2005 9:15 am
- Location: Chicago, IL, USA
- Contact:
Bosch 2 wires Idle Valve
pin 1 is 12V, pin 2 is gnd (MS fidle). This valve is open at 0, closed at 25% DC and should regulate at ~40%DC. It is used in Bosch LH2.4 systems. (not LH2.4.x). It is in this schematicas item 272:
http://townsendimports.com/Web/electrical_system_folder/lh24wiringnfmp.htm
I use this valve.
KeithG
Posted by email.
http://townsendimports.com/Web/electrical_system_folder/lh24wiringnfmp.htm
I use this valve.
KeithG
Posted by email.