Does anyone use the Variable Launch Control feature?
How easy is it to use?
Just considering whether to skip that in MS2 code.
James
Launch control - variable
Moderators: jsmcortina, muythaibxr
-
- Site Admin
- Posts: 39619
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
Launch control - variable
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
-
- Helpful MS/Extra'er
- Posts: 37
- Joined: Fri Jun 03, 2016 2:55 pm
Re: Launch control - variable
Hello James
I have build a mainboard for a microsquirt modul v2.2 and variable lauch control is very intersting for me.
With an other ecu (http://kms.vankronenburg.nl/products/ecus/mp25) i am using, in race, a variable lauch control. It is works with a potentiometer. 0 = minimun launch rpm and 1023 = lauch max. I can change rpm on the start lane (if weather condition change).
i send you a PM (Firmware documentation).
Sorry for my english
I have build a mainboard for a microsquirt modul v2.2 and variable lauch control is very intersting for me.
With an other ecu (http://kms.vankronenburg.nl/products/ecus/mp25) i am using, in race, a variable lauch control. It is works with a potentiometer. 0 = minimun launch rpm and 1023 = lauch max. I can change rpm on the start lane (if weather condition change).
i send you a PM (Firmware documentation).
Sorry for my english
-
- Site Admin
- Posts: 39619
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
Re: Launch control - variable
If only you'd posted a week ago it could have been a whole decade since my post!
James
James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
-
- Helpful MS/Extra'er
- Posts: 37
- Joined: Fri Jun 03, 2016 2:55 pm
Re: Launch control - variable
ok I did not see the date.
But is it possible to add it ?
But is it possible to add it ?
-
- Super MS/Extra'er
- Posts: 17507
- Joined: Thu Apr 16, 2009 8:08 pm
Re: Launch control - variable
Variable launch with a potentiometer input has been implemented... in MS3. MS1 development has been tied off for a while; the processor has been discontinued and the supply of them is almost out.
Matt Cramer -1966 Dodge Dart slant six running on MS3X