Oxy-sensor?

[lekman]

Before I used to use Megatune, and I remember it was pretty complicated to change the settings for type of oxy-sensor.
My question is. Now when using Tuner Studio; is it correct that it is much easier to swap between the sensor types? Is it just to change in the menus of TS?

/Lars

[Matt Cramer]

It is a bit simpler, but the exact procedure depends on what MS version and firmware you have.

[lekman]

I have ms1v3 and the latest ms-extra code (which is pretty old I believe). Don't remember y29, something

/Lars

[Matt Cramer]

In this case, you specify the O2 sensor type in the Settings tab of the Project Properties window.

[lekman]

Thanks
/Lars