Some analysis please

All Megasquirt 1 support questions. See also the Documentation

Moderators: jsmcortina, muythaibxr

Post Reply
JasonNA
MS/Extra Newbie
Posts: 6
Joined: Sun Feb 17, 2013 4:56 am

Some analysis please

Post by JasonNA »

Car is a 1991 MK1 1.6 MX5/Miata with:
- T28 turbo conversion
- MSPNP gen1
- 550cc injectors
- Innovate LC-1 wideband
- Magnecor 8.5mm HT leads
- NGK BKR7EIX Iridium spark plugs

I just swapped in a replacement engine and it seems to be running very rich, the smell alone would give it away.

Attached is the datalog and the MSQ that is on the Megaquirt at the minute, this was tuned professionally and not by me.

Can anyone please have a look at what's going on as I'm very much a beginner when it comes to engine management.
Matt Cramer
Super MS/Extra'er
Posts: 17507
Joined: Thu Apr 16, 2009 8:08 pm

Re: Some analysis please

Post by Matt Cramer »

First try giving the LC-1 a free air calibration. The readings are bouncing hard from 0 to 5 volts, and that sounds like the wideband may not be getting a proper reading. If it's not reading correctly, that will make it harder for me to interpret the data log.
Matt Cramer -1966 Dodge Dart slant six running on MS3X
Post Reply