Good afternoon all. I am looking to try and connect to my MegaSquirt-I PCBv3.57 running the MS1-Extra firmware via an iPad to enable me to use the MobiSquirt app. I have read up on several forums that suggest a R-232 to Wifi adapter but wanted to see if anyone had done this and recommend one that works.
Thanks
Iain
IPad - Wi-fi Access
Moderators: jsmcortina, muythaibxr
-
- Master MS/Extra'er
- Posts: 652
- Joined: Thu Dec 09, 2010 3:48 pm
Re: IPad - Wi-fi Access
not to be rude, but mobisquirt has not been updated for some years now and that adaptor is expensive and scarce. If you wish to use a tablet for visuals or tuning, get an android device...
Re: IPad - Wi-fi Access
Thanks for that...if I do go for the Android Tablet i'm guessing its just a R232 to Bluetooth adapter?
-
- Master MS/Extra'er
- Posts: 652
- Joined: Thu Dec 09, 2010 3:48 pm
Re: IPad - Wi-fi Access
Yes. Use the adapter that efianalytics reccomends, of search for $7 bluetooth. That is what im using...