Trying to rescue MS1 poweered car

dakotaprerunner · Post by **dakotaprerunner** » Sat Oct 25, 2014 4:37 pm

Hello,

I am trying to help a friend with his car. The Megasquirt that is currently running the car is an old MS1 with the 2.2 board. The firmware on the ECU is MegasquirtnSpark Extra 025i6*****. Tunerstudio needs the Serial Signature MSnS-extra format 025g ******. Does anyone have the firmware or required .ini file to allow me to comunicate with this ECU and copy all the settings? We are going to put a newer MS2 V3.0 board into the car.

Huge thanks,

Connor

Peter Florance · Post by **Peter Florance** » Sat Oct 25, 2014 7:28 pm

I can check tomorrow. I may have it

Peter Florance · Post by **Peter Florance** » Mon Oct 27, 2014 9:12 am

Sorry, I've got 25v2 and 24s9

Maybe James has somewhere?

Post by **jsmcortina** » Tue Oct 28, 2014 3:57 am

dakotaprerunner wrote:The firmware on the ECU is MegasquirtnSpark Extra 025i6*****. Tunerstudio needs the Serial Signature MSnS-extra format 025g ******.

From the depths of time (Aug 2005) see attached.

James

dakotaprerunner · Post by **dakotaprerunner** » Tue Oct 28, 2014 6:19 am

Thank you so much James.

Megasquirt Support Forum (MSEXTRA)

Trying to rescue MS1 poweered car

Trying to rescue MS1 poweered car

Re: Trying to rescue MS1 poweered car

Re: Trying to rescue MS1 poweered car

Re: Trying to rescue MS1 poweered car

Re: Trying to rescue MS1 poweered car