No rpm signal?
Moderators: jsmcortina, muythaibxr
No rpm signal?
hey guys, wondering if i can get some help. I'm running a fuel only setup that is triggered off the coil. It was up and running with the standard ms1 on v2.2 board and i decided to updated to ms1extra. I updated then went through and set it for a fuel only after the upgrade but now i am not seeing an rpm when cranking. Any advice?
-
Matt Cramer
- Super MS/Extra'er
- Posts: 17507
- Joined: Thu Apr 16, 2009 8:08 pm
