Spectre EMS Pro and Water Injection
Moderators: jsmcortina, muythaibxr
Spectre EMS Pro and Water Injection
There is no mention of the use of water injection in the Spectre EMS Pro manuals but the outputs for JS0 and JS1 are available; JS0 for fan and JS1 for nitrous. I would assume both are wired as per the msextra manual. This is not a problem for JS0, pump control, but I doubt that JS1 can handle the current of an injector or fast acting valve hence the need for the IRLZ44. What are my options in this situation?