Ms1 No RPM
Moderators: jsmcortina, muythaibxr
Ms1 No RPM
Im running ms1 on my vr6 turbo and when attached to the car am getting no rpm signal at all. With the jim stim attached I can sweep my rpm smoothly but am still getting zero rpm when attached to the car. Anyone have any ideas were to start?
-
- Super MS/Extra'er
- Posts: 17499
- Joined: Thu Apr 16, 2009 8:08 pm
Re: Ms1 No RPM
What sort of trigger wheel are you using?
Can you post an MSQ and a tooth log of an attempted start?
Can you post an MSQ and a tooth log of an attempted start?
Matt Cramer -1966 Dodge Dart slant six running on MS3X
Re: Ms1 No RPM
im using the factory vr6 wheel which is a 60-2, ill post up an msq later when im home, im getting no activity on the tooth logger when attempting to start
-
- Super MS/Extra'er
- Posts: 17499
- Joined: Thu Apr 16, 2009 8:08 pm
Re: Ms1 No RPM
both my trim pots are fully ccw still seeing no activity on my tooth logger
-
- Super MS/Extra'er
- Posts: 17499
- Joined: Thu Apr 16, 2009 8:08 pm
Re: Ms1 No RPM
Try recalculating your trigger return points - they don't look right.
http://www.msextra.com/doc/ms1extra/MS_ ... #wheelsoft
http://www.msextra.com/doc/ms1extra/MS_ ... #wheelsoft
Matt Cramer -1966 Dodge Dart slant six running on MS3X