manual(http://www.msextra.com/doc/ms1extra/MS_ ... #2cylinder) says
ok, but the picture confused mePLEASE NOTE, IF YOU PLAN TO RUN IGNITION ON A 2 CYLINDER ENGINE THEN YOU MUST SET THE ENGINE UP AS A 4 CYLINDER USING THE WHEEL DECODER (36-1, ETC) AS THE CODE FOR IGNITION WILL HAVE TOO LONG A DELAY TO WORK CORRECTLY.
what is correct?
second question about wheel decoder xls, it has options for 2 or 4 cyl, I must use 4 cyl option?