I've received a customer's ECU to repair that appears to have the way obsolete Megasquirt'n'spark firmware on it. Does anyone have a working tuning configuration for it? It's been such a long time (over 12 years) since I last used it that I can't remember. All I want to do is get the customer's tune off.
Megatune doesn't find my USB-serial port.
TunerStudio doesn't want to talk to it (just keeps sending 'Q', gets the correct answer, then sends 'Q' again.)
James
Megasquirt'n'spark - tuning
Moderators: jsmcortina, muythaibxr
-
jsmcortina
- Site Admin
- Posts: 39615
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
Megasquirt'n'spark - tuning
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
-
jsmcortina
- Site Admin
- Posts: 39615
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
Re: Megasquirt'n'spark - tuning
I was able to get it to talk to Megatune in the end, TunerStudio wasn't having any of it.
James
James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".