tps not reading below 60%
Moderators: jsmcortina, muythaibxr
tps not reading below 60%
My TPS is not reading below 60%, i tried re calibrating and same thing...any ideas...gnd, ref and sig all confirmed.
Re: tps not reading below 60%
Have you checked with a DVM that the voltage output from the TPS changes smoothly as you open the throttle? Best to do this with the TPS connected.
Rover SD1 3.5 EFI
MS2 V3
EDIS
Tech Edge O2
London UK.
MS2 V3
EDIS
Tech Edge O2
London UK.