Settings Error in MSQ

All Megasquirt 1 support questions. See also the Documentation

Moderators: jsmcortina, muythaibxr

Post Reply
Mazda808
MS/Extra Newbie
Posts: 15
Joined: Sat Jul 23, 2016 11:38 pm

Settings Error in MSQ

Post by Mazda808 »

Hi Team,

I've got a Mazda 12a thats wired as per the Aaron Cake article except for the CAS which is a standard series 4 RX7 one with two missing teeth 180 degrees apart and the top "CAM" wheel not connected. I understand this is a common way to set these up.

Havent actually managed to get the car started yet. We suspected a spark issue so we thought we'd disable the trailing support to confirm my coil wiring but we got a settings error. Coils are four IGN-1A
Heres how they are wired.
IMAG0418.jpg - Windows Photo Viewer.jpg
Here is the error I got when I disabled Trailing support
Mini-Term.jpg
And here is the MSQ If someone can advise where the confilct is or what setting is wrong it'd be greatly appreciated.
Steves808.msq
Thanks in advance
Steve
Post Reply