Cherry hall sensor and edis
Moderators: jsmcortina, muythaibxr
-
- Helpful MS/Extra'er
- Posts: 100
- Joined: Tue Apr 26, 2016 3:17 am
Cherry hall sensor and edis
I have a question could I use a cherry hall sensor with my edis8 ignition modual if I could how would I wire it up the cherry hall sensor has 3 wires brown blue and black any help would be great thanks.
-
- Site Admin
- Posts: 39618
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
Re: Cherry hall sensor and edis
No, don't do that.
Use a matching Ford VR sensor only.
James
Use a matching Ford VR sensor only.
James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
-
- Helpful MS/Extra'er
- Posts: 100
- Joined: Tue Apr 26, 2016 3:17 am
Re: Cherry hall sensor and edis
Ok I do have a ford sensor I will stick with that thanks for the quick reply