Hello folks,
so I've decided to change from a HEI setup to a MSnSpark setup. Using a locked points dizzy to trigger the ignition input and BIP373.
When I simulate it manually I could see the sparks and the injectors pulsing. When I try to start the car.. just here the engine turning and some clicking on the FP and INJ relays.
Any toughts on this?
Br,
Enginer won't start. Relay clicking
Moderators: jsmcortina, muythaibxr
Enginer won't start. Relay clicking
MOPAR or NO CAR!!
1973 Brasilian Dart
megasquirted
1973 Brasilian Dart
megasquirted
-
- Super MS/Extra'er
- Posts: 17507
- Joined: Thu Apr 16, 2009 8:08 pm
Re: Enginer won't start. Relay clicking
Looks like a noisy RPM input - how exactly do you have the board set up for RPM input?
Matt Cramer -1966 Dodge Dart slant six running on MS3X