Enginer won't start. Relay clicking

[dart73]

Hello folks,

so I've decided to change from a HEI setup to a MSnSpark setup. Using a locked points dizzy to trigger the ignition input and BIP373.
When I simulate it manually I could see the sparks and the injectors pulsing. When I try to start the car.. just here the engine turning and some clicking on the FP and INJ relays.

Any toughts on this?


Br,

2016-10-30_18.24.40.msl

Dart_tune.msq

[Matt Cramer]

Looks like a noisy RPM input - how exactly do you have the board set up for RPM input?