hi new here,, i come from Denmark and i have a big problem i have bin looking for days how to calibrate my new videband ..it is a bit of and the engine run bad.
it is a vw vento from 93 1.8 original monopoint ,, now 4 injektors and turbo
i have tunerstudios ms .. but is this the right one to adjust on ms1 exstra becors all methodes i have found to adjust it is a no go.. cant find a calibrate afr in tools or other places
any help welcome,,
regards jens
afr calibration
Moderators: jsmcortina, muythaibxr
Re: afr calibration
Wideband EGO calibration is under tools. May need to enable it when setting up new project.
Jim
Jim
Toyota MR2 98 3sgte
MSPNP2 with 3.57 mainboard
Innovate WB O2 & soon to be external GM 3 bar MAP
FTDI USB interface on SD Android 5.1 head unit
TD05SL2-18g with external WG
HKS EBC running 17psi boost.
A2W IC with WI 50/50 meth/water
MSPNP2 with 3.57 mainboard
Innovate WB O2 & soon to be external GM 3 bar MAP
FTDI USB interface on SD Android 5.1 head unit
TD05SL2-18g with external WG
HKS EBC running 17psi boost.
A2W IC with WI 50/50 meth/water
Re: afr calibration
ok i have been looking for a place to unloock it but cant find it,, ???
-
- Site Admin
- Posts: 39617
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
Re: afr calibration
Not on MS1 it isn't. Project Properties -> Settings perhaps.
James
James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
Re: afr calibration
ok thanks i will go have a look