HELP Needed..Truncated Temp Range MS1 029Y4 Fuel and Spark

All Megasquirt 1 support questions. See also the Documentation

Moderators: jsmcortina, muythaibxr

Post Reply
efims
Helpful MS/Extra'er
Posts: 130
Joined: Sun Oct 30, 2011 8:59 am

HELP Needed..Truncated Temp Range MS1 029Y4 Fuel and Spark

Post by efims »

Truncated 71.0.jpg
Truncated 119.3.jpg
I increase the X axis of Priming PV Table..able to put in some values...successfully BURN and Save....reload the MSQ and it's still there.

However, when I close TS and open TS again,load the same MSQ, the X-axis goes back to 71C. Values for various Temp above 71C were truncated(missing)

Is there somewhere that I need to specify that I would like to have values above 71C(say 90C or 110C)

Thanks in advance for help to resolve this problem.
2017-02-12_17.44.33.msq
jsmcortina
Site Admin
Posts: 39585
Joined: Mon May 03, 2004 1:34 am
Location: Birmingham, UK
Contact:

Re: HELP Needed..Truncated Temp Range MS1 029Y4 Fuel and Spa

Post by jsmcortina »

From memory, I'm pretty sure that you cannot adjust those temperatures on MS1.

James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk

My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
efims
Helpful MS/Extra'er
Posts: 130
Joined: Sun Oct 30, 2011 8:59 am

Re: HELP Needed..Truncated Temp Range MS1 029Y4 Fuel and Spa

Post by efims »

What happen to Prime PV when engine is cranked above 71C?

I believe there is some set value, else engine can't start, right?
slow_hemi6
Super MS/Extra'er
Posts: 4122
Joined: Fri May 07, 2004 3:33 am
Location: Australia

Re: HELP Needed..Truncated Temp Range MS1 029Y4 Fuel and Spa

Post by slow_hemi6 »

Like most things in MS it will continue to use the last (71C) value for temps above.
Find the Manuals up top under Quick links: Manuals. :RTFM:
Cheers Luke
Post Reply