24 tooth + 1 tooth Cam but waste spark

[mazdaspeed]

Hi guys im sure this has been discussed over and over

The setup is a 24 tooth + 1 cam tooth built into the dizzy and wasted spark

So i can do the appropriate mods to accept the two inputs thays no worries

But can it decode the inputs and outputs ok

I assume the settings will run somthing like this???

Enable
Spark output A
Spark output B

Trig A 2
Trig B 8
Trig C 14
Trig D 20

Please let me know if this can work and what are my options for trigger angle???

Thanks



Sent from my SM-N920I using Tapatalk