can you help me on this situation ?
I'm always setting up ms2s and many other ecus, however, now I have to deal with an ms1 extra for a customer's car and I want to make it work.
with the settings below : I get spark but the car doesnt work. I have blasts and etc. it seems the timing for spark is wrong..
this is a custom setup.
60-2 wheel with a bosch vr sensor.
4 cop coils.
with the below setup - I get ignition and I checked it with timing gun - 0 degree at tdc is OK.
here is my wheel :
and here is my ms1 settings :
ms1 extra - I can't do it...
Moderators: jsmcortina, muythaibxr
-
- Super MS/Extra'er
- Posts: 17507
- Joined: Thu Apr 16, 2009 8:08 pm
Re: ms1 extra - I can't do it...
Matt Cramer -1966 Dodge Dart slant six running on MS3X
Re: ms1 extra - I can't do it...
?
Sent from my Redmi Note 4 using Tapatalk
Sent from my Redmi Note 4 using Tapatalk
-
- Super MS/Extra'er
- Posts: 17507
- Joined: Thu Apr 16, 2009 8:08 pm
Re: ms1 extra - I can't do it...
If the timing appears to be OK with a timing light, it is time to look at the complete tune and a data log of the problem instead of just the wheel decoder.
Matt Cramer -1966 Dodge Dart slant six running on MS3X