converting ms2 back to ms1
Moderators: jsmcortina, muythaibxr
-
- MS/Extra Newbie
- Posts: 10
- Joined: Wed Mar 15, 2017 8:53 am
converting ms2 back to ms1
I purchased a v3.0 pcb that had been previously upgraded with the ms2 daughter card, but I opted to have it shipped to me with the ms1 cpu. The board had previously been modded for the ms2, and my searches are bringing up a little confusion. Are there mods that I need to undo to go back to the ms1 cpu?
Re: converting ms2 back to ms1
Before powering it up, make sure there isn't a link from JS9 to 12v. This is for the stepper motor driver chip on the MS2 card, and is said to destroy an MS1.
I would ask just why you've opted for an obsolete MS1. An MS2 can do everything an MS1 can do, and more.
I would ask just why you've opted for an obsolete MS1. An MS2 can do everything an MS1 can do, and more.
Rover SD1 3.5 EFI
MS2 V3
EDIS
Tech Edge O2
London UK.
MS2 V3
EDIS
Tech Edge O2
London UK.