Ford EEC-V to MegaSquirt adaptor board, I need your input.

A forum for discussing the MegaSquirt related (but non-B&G) board development, assembly, installation, and testing.

Moderators: jsmcortina, muythaibxr

Re: Ford EEC-V to MegaSquirt adaptor board, I need your inp

Postby 78Spit1500Fed » Sat Aug 18, 2012 2:29 pm

What's up?

I found, in my closet, in a pile of old MS stuff a V1.0 EECV-MS board! It's completely unmolested; as shipped to me by scott way back when.

Does anyone have any use for it? It's yours if you want it.

-Deek
Image
User avatar
78Spit1500Fed
MS/Extra Guru
 
Posts: 1095
Joined: Thu Jul 29, 2004 5:36 am
Location: Terre Haute, Indiana

Re: Ford EEC-V to MegaSquirt adaptor board, I need your inp

Postby Foolee » Sat Sep 22, 2012 2:14 pm

ill take it, e-mail me.
mr_lee@live.ca
Foolee
MS/Extra Newbie
 
Posts: 6
Joined: Thu Aug 09, 2012 3:58 pm

Re: Ford EEC-V to MegaSquirt adaptor board, I need your inp

Postby 78Spit1500Fed » Sun Sep 23, 2012 5:43 am

The adapter board has been spoken for.

-Deek
Image
User avatar
78Spit1500Fed
MS/Extra Guru
 
Posts: 1095
Joined: Thu Jul 29, 2004 5:36 am
Location: Terre Haute, Indiana

Re: Ford EEC-V to MegaSquirt adaptor board, I need your inp

Postby hardline » Wed May 08, 2013 1:53 pm

If you get back into this, I am highly interested. I plan on getting ahold of one of the breakout boards, using an MS3-Pro Module and fitting everything inside the stock ECU case.
2000 ZX2 : Sequential COP, MS3 + MS3X + TinyIOx, PWM Returnless Fuel, Variable Cam Timing, Flex Fuel, Variable Geometry Intake Manifold, T3 60/.63 turbo @ 18 PSI Boost.
hardline
Master MS/Extra'er
 
Posts: 399
Joined: Mon Sep 08, 2008 8:37 pm
Location: Central Colorado.

Re: Ford EEC-V to MegaSquirt adaptor board, I need your inp

Postby vhturbo11 » Sat Jun 22, 2013 12:53 pm

I have copies of the original layout of the PCB for the EEC-V to MegaSquirt adapters that Scott sent me few years ago while the project was in its midpoint.I have been not to involved in a MS EEC*** project for some time now and have not had any feed back on the Mustang and other EEC-V related forums for a need for one bad enough to continue.I haven't fully got all the common pin locations for all the years it covers located yet ,(going through all the ford ecu manuals and making a spread sheet of them is a p.i.t.a)Maybe here soon I will continue with some development on this, as of now looking at my layouts I was incorporating 2 DB37 connectors for use on either a MS3/MSII setup as just making up you 2 connectors and plug them from both MegaSquirt and the adapter board, but from reading up on the Microsquirt module and other ideas Scott had. I may just leave enough room in the case to install a controller and just solder to where you need you I/O's leaving both connectors on there as a option to the end user. At any case between my job and other projects I wouldn't expect this project to be completed with proto boards until late this year, if everything goes well that is.I'll keep checking in time to time If anything develops.
vhturbo11
MS/Extra Newbie
 
Posts: 7
Joined: Tue Apr 13, 2010 7:38 pm
Location: West By God Virginia

Re: Ford EEC-V to MegaSquirt adaptor board, I need your inp

Postby dsleepy47 » Wed Feb 05, 2014 2:48 pm

I have been off the board for a while. I was wondering where things are at for an EEC-V megasquirt adapter. I am looking at a 1996 F150 Automatic as the first project, which has TFI distributor.

Deems
dsleepy47
Helpful MS/Extra'er
 
Posts: 77
Joined: Tue May 04, 2004 8:12 pm

Previous

Return to Expansion boards

Who is online

Users browsing this forum: No registered users and 3 guests