Innovate serial data DIYAUTO CAN EGT

A forum for discussing the MegaSquirt related (but non-B&G) board development, assembly, installation, and testing.

Moderators: jsmcortina, muythaibxr

Innovate serial data DIYAUTO CAN EGT

Postby TheTech78 » Wed Jan 10, 2018 4:15 pm

We will be using the DiyAutoTune can egt module to monitor egt data and using 2 lc2's for our widebands on a n/a rx7 we are doing. What I am curious about is can any other innovate serial data able to be used or if it is only limited to the O2's. This project originally started using a microsquirt, and has worked well. But like all project cars this has evolved into something we would ultimately like more data on. Appreciate your input on this, and thank you for your time.
MS/Extra Newbie
Posts: 2
Joined: Thu Aug 17, 2017 11:42 am

Re: Innovate serial data DIYAUTO CAN EGT

Postby racingmini_mtl » Wed Jan 10, 2018 5:30 pm

Only the O2 data is read on the serial link.

Jean Main site . . . . . . . . . . . . . . . . . . . . . . Forum
Super MS/Extra'er
Posts: 8041
Joined: Sun May 02, 2004 6:51 am
Location: Quebec, Canada

Return to Expansion boards

Who is online

Users browsing this forum: No registered users and 1 guest