Expansion board - Revised layout posted

ca434sbc4 · Post by **ca434sbc4** » Sat May 06, 2006 5:23 pm

T3Bunny wrote:Rough idea of timeframe and cost?

Most likely 4-8 weeks after the inital boards are in the hands of the end users and the initial kernel of users are up and running as they can then provide feedback and some support the 2nd wave...

ca434sbc4 · Post by **ca434sbc4** » Thu May 18, 2006 10:13 pm

Still waiting for funds to arrive........

Brad-Man · Post by **Brad-Man** » Mon May 22, 2006 2:05 pm

I would definitely be interested in this as I want MSII for using the GPIO board for MegaShift, but need 6 cyl wasted spark COP.

WolfGTI · Post by **WolfGTI** » Tue May 23, 2006 8:32 am

With regards to the funds, I sent the money order out to the wrong address and got it back RTS. Anyways I had to get cancel the original postal money order because it also had the wrong address fort the recipient. I put the new one with the correct address etc in the mail to Marc via express US mail this morning - I have asked him to contact me to confirm receipt of it - sorry for the mistake on my part.

Incase anyone is wondering why I took a little long to get teh 2nd money order out - the Post office refunds money orders by check and I had to wait 5 business days to get their refund check. Then I was out of town for a week due to work, however I as stated before I took care of it this morning - again my apologies.

ca434sbc4 · Post by **ca434sbc4** » Tue May 30, 2006 5:58 pm

I rec'd payment from Wolf tonight. I need to refersh the quote from the PCB shop as it's over 30 days, once I get the final price then I'll place the order and 10 to 14 days later the boards should arrive. Once I do a physical inspection I'll ship them out.

What is left to do is to update the parts list and post it on the MS site which I will do after the boards are ordered.

WolfGTI · Post by **WolfGTI** » Wed May 31, 2006 8:54 am

ca434sbc4 wrote:I rec'd payment from Wolf tonight. I need to refersh the quote from the PCB shop as it's over 30 days, once I get the final price then I'll place the order and 10 to 14 days later the boards should arrive. Once I do a physical inspection I'll ship them out.

What is left to do is to update the parts list and post it on the MS site which I will do after the boards are ordered.

Good to hear you got the money - I apologize for the delay, now the project is moving again

Brad-Man · Post by **Brad-Man** » Fri Jun 02, 2006 3:48 pm

Excellent news. I can't wait 'til tested so I can order one and an MSI v.3 and MS2 Daughtercard!

ca434sbc4 · Post by **ca434sbc4** » Mon Jun 12, 2006 4:15 pm

Its official the board order has been placed, I got a call from the board shop today to review the order. So in 10 days I expect to have pcb's in hand.

WolfGTI · Post by **WolfGTI** » Mon Jun 12, 2006 5:25 pm

ca434sbc4 wrote:Its official the board order has been placed, I got a call from the board shop today to review the order. So in 10 days I expect to have pcb's in hand.

Sweet - how many boards do you anticipate ?

nelson_trujillo · Post by **nelson_trujillo** » Wed Jun 14, 2006 5:04 am

Just found the post...
Is it too late for getting into the list for a kit?
I'm live-beta testing MSII 2.67 and I need wasted spark from MSnS-E...
Thanks.

ca434sbc4 · Post by **ca434sbc4** » Wed Jun 14, 2006 11:49 am

Once the initial beta boards are built and tested I expect to make the bare PCB available through the distrbutors. Most likley mid-August.

nelson_trujillo · Post by **nelson_trujillo** » Wed Jun 14, 2006 12:49 pm

ca434sbc4 wrote:Once the initial beta boards are built and tested...

I was talking about the list of those beta boards, not the initial public release.
would you?

ca434sbc4 · Post by **ca434sbc4** » Thu Jun 15, 2006 6:45 pm

nelson_trujillo wrote:
ca434sbc4 wrote:Once the initial beta boards are built and tested...
I was talking about the list of those beta boards, not the initial public release.
would you?

The 3 people that decided to participate in the group buy made a substantial $$$ contribution to get the beta boards made. In all fairness to them I cannot offer the beta boards.

I do have 2 alpha boards left, you could get one of them however they don't have serial comm's on them.

M.

nelson_trujillo · Post by **nelson_trujillo** » Sat Jun 17, 2006 5:10 am

yeah, you're right. They got the lead.
rather will wait until released to public channels.
Thanks.

WolfGTI · Post by **WolfGTI** » Fri Jun 23, 2006 7:06 pm

I have been informed that the boards are in Marc's hands. He will maile them to me next week and I will mail them to the individuals that are contributed for this production run. I will be out of town for the July 4th holiday from Jun28th through July 5th. If the boards do not get to me before I leave, I will be sure to send them out when I get back.

WolfGTI · Post by **WolfGTI** » Sun Jul 02, 2006 11:45 am

OK I've found out the boards are at my office. I will be on the West coast until Wed, so I will ship them out this coming weekend when I return to Philly.

krisr · Post by **krisr** » Sun Jul 02, 2006 3:33 pm

Very eager to get hold of this expansion board once it's made public too! I'm dying to setup V8 wasted spark..

Kris

WolfGTI · Post by **WolfGTI** » Sat Jul 08, 2006 6:03 pm

Ok I am back from vacation - boards are packaged will ship them on Monday.

Nickel_5000tq · Post by **Nickel_5000tq** » Sun Jul 23, 2006 4:39 pm

Hi guys, can we see the pictures of the board and the description.

thanks

ca434sbc4 · Post by **ca434sbc4** » Tue Jul 25, 2006 10:33 pm

I'll send a pix to Lance and ask him to post it.

Megasquirt Support Forum (MSEXTRA)

Expansion board - Revised layout posted

exp pcb - wide availability

update - still awaiting funds

RE: funds for the boards

Payment has arrived today

Re: Payment has arrived today

PCB order

Re: PCB order

MSexp2 availability

Re: MSexp2 availability

Re: MSexp2 availability

expansion pcb pix.