Microsquirt module test board
Moderators: jsmcortina, muythaibxr
-
- Site Admin
- Posts: 39621
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
Microsquirt module test board
I put this together in order to test a Microsquirt module. Just wondering if anyone is interested in a PCB if I have a small batch made?
This is the same idea as the "Utility board" shown in the manual except that it connects to the correct side of the module, includes a serial connector and has the MSEXTRA header connected.
Photos of my self-etched board.
James
This is the same idea as the "Utility board" shown in the manual except that it connects to the correct side of the module, includes a serial connector and has the MSEXTRA header connected.
Photos of my self-etched board.
James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
Re: Microsquirt module test boad
Hello James,
I am interested for one of these
Thank you for your proposal.
Ben
I am interested for one of these
Thank you for your proposal.
Ben
-
- Super MS/Extra'er
- Posts: 3653
- Joined: Fri Apr 02, 2004 8:40 pm
- Location: Virginia Beach, VA
- Contact:
Re: Microsquirt module test board
Same here.
You don't want to see what I lashed up to test the last one I had in here.
You don't want to see what I lashed up to test the last one I had in here.
Peter Florance
PF Tuning
81 BMW Euro 528i ESP Car
60-2 Wheel LS2 Coils, Low Z Inj
Co-Driver 1999 BMW E46 DSP car.
PF Tuning
81 BMW Euro 528i ESP Car
60-2 Wheel LS2 Coils, Low Z Inj
Co-Driver 1999 BMW E46 DSP car.
-
- Master MS/Extra'er
- Posts: 847
- Joined: Tue Jan 20, 2009 10:21 am
- Location: Lancashire UK
- Contact:
Re: Microsquirt module test board
I'd have one, it'd be useful for doing swap out, back to back tests etc, so +1 more please.
Yamaha GTS1000 v2 MicroSquirt, B&G 2.891
Yamaha GTS1000 v3 beta MicroSquirt, B&G3.760
Yamaha GTS1000 MSExtra 3.1, Dual VR Board
Yamaha YZF1000 MSExtra 3.1
Yamaha GTS1000 v3 beta MicroSquirt, B&G3.760
Yamaha GTS1000 MSExtra 3.1, Dual VR Board
Yamaha YZF1000 MSExtra 3.1
Re: Microsquirt module test board
yes, i would be interested also.
I have been waiting for the utility board forever.
Thanks.
I have been waiting for the utility board forever.
Thanks.
1986 G.N. (sold)
1967 Nova II wagon (sold)
ex-MSer
1967 Nova II wagon (sold)
ex-MSer
Re: Microsquirt module test board
I would like to have one, how hard would it be to make the board a little larger, and add a proto area?
-
- Site Admin
- Posts: 39621
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
Re: Microsquirt module test board
I took a chance and ordered some... due within a few weeks.
James
James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
Re: Microsquirt module test board
Please put me down for one.
thanks.
thanks.
1986 G.N. (sold)
1967 Nova II wagon (sold)
ex-MSer
1967 Nova II wagon (sold)
ex-MSer
-
- Super MS/Extra'er
- Posts: 3653
- Joined: Fri Apr 02, 2004 8:40 pm
- Location: Virginia Beach, VA
- Contact:
Re: Microsquirt module test board
same here
Peter Florance
PF Tuning
81 BMW Euro 528i ESP Car
60-2 Wheel LS2 Coils, Low Z Inj
Co-Driver 1999 BMW E46 DSP car.
PF Tuning
81 BMW Euro 528i ESP Car
60-2 Wheel LS2 Coils, Low Z Inj
Co-Driver 1999 BMW E46 DSP car.
-
- Helpful MS/Extra'er
- Posts: 60
- Joined: Sat Oct 22, 2011 3:13 pm
Re: Microsquirt module test board
I'm looking for a relay board. Though I'm not sure what I am looking for in those pics. Details?
I can see four relays on the underside, is it four total? Does it fit in to the Microsquirt enclosure? Does it need a harness or extra wiring? What type of fusing? If I put my name down for one, what's the approximate costs?
Thanks
I can see four relays on the underside, is it four total? Does it fit in to the Microsquirt enclosure? Does it need a harness or extra wiring? What type of fusing? If I put my name down for one, what's the approximate costs?
Thanks
-
- Site Admin
- Posts: 39621
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
Re: Microsquirt module test board
This is nothing to do with a relay board. It is a screw terminal board used for testing Microsquirt Modules.
James
James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
-
- Helpful MS/Extra'er
- Posts: 60
- Joined: Sat Oct 22, 2011 3:13 pm
Re: Microsquirt module test board
argh, my bad!
...wait, no I was directed here... someone must have linked me wrong.
...wait, no I was directed here... someone must have linked me wrong.
-
- Site Admin
- Posts: 39621
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
Re: Microsquirt module test board
Got the PCBs in.
Photo of assembled and bare. I only bought a small batch, so the pricing reflects that. I tested all the main functions on the stim and all works as expected. I haven't checked the "MSEXTRA connector."
Bare PCB = £15 or USD$25
Postage to USA $14 using "Airsure" service.
James
Photo of assembled and bare. I only bought a small batch, so the pricing reflects that. I tested all the main functions on the stim and all works as expected. I haven't checked the "MSEXTRA connector."
Bare PCB = £15 or USD$25
Postage to USA $14 using "Airsure" service.
James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
-
- Master MS/Extra'er
- Posts: 847
- Joined: Tue Jan 20, 2009 10:21 am
- Location: Lancashire UK
- Contact:
Re: Microsquirt module test board
Looks great James, really useful addition for my stuff, as I can progress/test the ECU replacement & the 4 cylinder sequential kit.
Can I PayPal the money to you?
Where in the UK did you source the 50pin connector from?
PS Looks like you put a 10 way connector on as well, which is one thing that Bruce wasn't covering with his Access Board.
Can I PayPal the money to you?
Where in the UK did you source the 50pin connector from?
PS Looks like you put a 10 way connector on as well, which is one thing that Bruce wasn't covering with his Access Board.
Yamaha GTS1000 v2 MicroSquirt, B&G 2.891
Yamaha GTS1000 v3 beta MicroSquirt, B&G3.760
Yamaha GTS1000 MSExtra 3.1, Dual VR Board
Yamaha YZF1000 MSExtra 3.1
Yamaha GTS1000 v3 beta MicroSquirt, B&G3.760
Yamaha GTS1000 MSExtra 3.1, Dual VR Board
Yamaha YZF1000 MSExtra 3.1
-
- Site Admin
- Posts: 39621
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
Re: Microsquirt module test board
I sourced parts from Farnell. That 50pin connector seemed WAY too expensive (around a fiver.)
Here's the parts list and part numbers I used:
4 off 10 way 0.2" Phoenix terminal blocks - 3041293
1 off 2 way 0.2" Phoenix terminal block - (had one in stock) 3041165 similar
1 off 50 way dual 0.1" pin header - 1668403
1 off 10 way dual 0.1" pin header - 1668348
1 off 2 way 0.1" pin header - part of 1097954
1 off DB9 female (F1 style) - 1084701
Here's the parts list and part numbers I used:
4 off 10 way 0.2" Phoenix terminal blocks - 3041293
1 off 2 way 0.2" Phoenix terminal block - (had one in stock) 3041165 similar
1 off 50 way dual 0.1" pin header - 1668403
1 off 10 way dual 0.1" pin header - 1668348
1 off 2 way 0.1" pin header - part of 1097954
1 off DB9 female (F1 style) - 1084701
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
-
- Master MS/Extra'er
- Posts: 847
- Joined: Tue Jan 20, 2009 10:21 am
- Location: Lancashire UK
- Contact:
Re: Microsquirt module test board
Thanks for those part references James, just placed my order with Farnell.
Yamaha GTS1000 v2 MicroSquirt, B&G 2.891
Yamaha GTS1000 v3 beta MicroSquirt, B&G3.760
Yamaha GTS1000 MSExtra 3.1, Dual VR Board
Yamaha YZF1000 MSExtra 3.1
Yamaha GTS1000 v3 beta MicroSquirt, B&G3.760
Yamaha GTS1000 MSExtra 3.1, Dual VR Board
Yamaha YZF1000 MSExtra 3.1
Re: Microsquirt module test board
Thank you James.
Hom much for shipping to France?
Ben
Hom much for shipping to France?
Ben
-
- Site Admin
- Posts: 39621
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
Re: Microsquirt module test board
Depends on service - either regular airmail or "international signed for". PM me your preference and I'll get a quote.BenGTT wrote:How much for shipping to France?
James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
-
- Master MS/Extra'er
- Posts: 847
- Joined: Tue Jan 20, 2009 10:21 am
- Location: Lancashire UK
- Contact:
Re: Microsquirt module test board
Board arrived in the post today, thank you
Yamaha GTS1000 v2 MicroSquirt, B&G 2.891
Yamaha GTS1000 v3 beta MicroSquirt, B&G3.760
Yamaha GTS1000 MSExtra 3.1, Dual VR Board
Yamaha YZF1000 MSExtra 3.1
Yamaha GTS1000 v3 beta MicroSquirt, B&G3.760
Yamaha GTS1000 MSExtra 3.1, Dual VR Board
Yamaha YZF1000 MSExtra 3.1