Information needed on Marc Piccioni's Dual Processor Board

A forum for discussing the MegaSquirt related (but non-B&G) board development, assembly, installation, and testing.

Moderators: jsmcortina, muythaibxr

Post Reply
T3Bunny
Super MS/Extra'er
Posts: 1391
Joined: Sun Nov 28, 2004 8:44 pm
Location: Miami, Florida

Information needed on Marc Piccioni's Dual Processor Board

Post by T3Bunny »

I have been in contact with Marc, and he lost all the old files in a crash. Glen had copies of everything on his website at one time, but that is in disrepair and he seems to be MIA. I noticed a few of you out there mentioning having these, and am hoping for some more insight into its inner workings. And specifically, I desperately need a schematic for it!

I actually have one, but it is partially unfinished and I am missing critical setup information. A schematic would answer most, if not all, my questions on it.

I was able to dredge the net for all the webpages that were associated with it. Everything was still available archived, except the pictures on the second page with the schematics. And no connected the files like the test code. If anyone wants these pages, I am likely going to reformat what I managed to get into PDF or something. I have some missing bits, so it was really nice to see the BOM was still archived.
Forget the porn, my bathroom is full of car manuals...
1977 Rabbit (retired)
1991 Cabriolet (retired)
dontz125
Super MS/Extra'er
Posts: 4223
Joined: Mon May 11, 2009 7:14 pm
Location: York, ON
Contact:

Re: Information needed on Marc Piccioni's Dual Processor Boa

Post by dontz125 »

Bit of a necro-thread, but I came across this post in a Google search for info on Marc's board! :lol:

Not sure if you're still looking, but this site seems to have pretty much everything - http://megasquirt.free.fr/sources/MS/ma ... /index.htm
Temporarily shut down - back soon!
QuadraMAP Sensor Module -- PWM-to-Stepper Controller -- Dual Coil Driver
Coming soon: OctoMAP Sensor Module
TTR Ignition Systems
Post Reply