Something we've been working with Jean on

Matt Cramer · Post by **Matt Cramer** » Wed Sep 05, 2012 1:28 pm

And it should be out by the end of the month if all goes well.

Post by **jsmcortina** » Thu Sep 06, 2012 12:08 pm

Looking good.

Setup info will be added to the MS3 manuals soon.

James

elturbonitroso · Post by **elturbonitroso** » Thu Sep 06, 2012 3:49 pm

thats nice do you guys have a price yet.

Matt Cramer · Post by **Matt Cramer** » Fri Sep 07, 2012 5:21 am

About $200 less than what FAST charges for their eight channel EGT box.

whittlebeast · Post by **whittlebeast** » Fri Sep 07, 2012 6:29 am

Way cool.

What are you thinking it would cost to bring up a 4 channel EGT setup on an existing MS3 install including the bungs, sensors...?

Beast

belalegosi · Post by **belalegosi** » Fri Jan 04, 2013 1:01 am

any updates on this?

Matt Cramer · Post by **Matt Cramer** » Fri Jan 04, 2013 6:52 am

Finishing up testing; it should be out soon unless we find unexpected issues.

belalegosi · Post by **belalegosi** » Sat Jan 05, 2013 2:40 am

Sounds good.
Would it come in a cheaper 4cyl variation or is 8cyl the only option?

Joe Clark · Post by **Joe Clark** » Sat Jan 05, 2013 5:29 am

that's neat!

MWPau · Post by **MWPau** » Sat Jan 05, 2013 8:16 pm

What connection / connector-type is used for the CAN bus?

racingmini_mtl · Post by **racingmini_mtl** » Sat Jan 05, 2013 8:24 pm

It's a 3.5mm TRRS connector:

TRRS.png

Where the tip is 12V (optional), the first ring is CANH, the second ring is CANL and the sleeve is ground.

Jean

Matt Cramer · Post by **Matt Cramer** » Thu Jan 31, 2013 1:34 pm

Almost ready, one last hitch to resolve with the cable.

Matt Cramer · Post by **Matt Cramer** » Fri Feb 08, 2013 6:42 am

The option we'd originally planned to use was a solder cup connector, but we had issues with the solder coming off of it. We have switched to a ready made pigtail. They're now live on the site:

http://www.diyautotune.com/catalog/cane ... p-542.html

elturbonitroso · Post by **elturbonitroso** » Sat Feb 09, 2013 12:54 pm

do you guys planning on make 4 cyl version.thanks

Matt Cramer · Post by **Matt Cramer** » Mon Feb 11, 2013 8:27 am

elturbonitroso wrote:do you guys planning on make 4 cyl version.thanks

Not at present - I don't think the savings would be all that much.

Megasquirt Support Forum (MSEXTRA)

Something we've been working with Jean on

Something we've been working with Jean on

Re: Something we've been working with Jean on

Re: Something we've been working with Jean on

Re: Something we've been working with Jean on

Re: Something we've been working with Jean on

Re: Something we've been working with Jean on

Re: Something we've been working with Jean on

Re: Something we've been working with Jean on

Re: Something we've been working with Jean on

Re: Something we've been working with Jean on

Re: Something we've been working with Jean on

Re: Something we've been working with Jean on

Re: Something we've been working with Jean on

Re: Something we've been working with Jean on

Re: Something we've been working with Jean on