Will Ms3 Ignition Knock & Realtime Clock fit with MS3X

A forum for discussing the MegaSquirt related (but non-B&G) board development, assembly, installation, and testing.

Moderators: jsmcortina, muythaibxr

Post Reply
jb007
Helpful MS/Extra'er
Posts: 139
Joined: Sat Dec 04, 2010 1:49 am
Location: Melbourne, Australia
Contact:
Contact jb007

Will Ms3 Ignition Knock & Realtime Clock fit with MS3X

Post by jb007 »

As subject says; will both the Ignition knock and Realtime Clock modules both fit into my MS3 fitted with an MS3X card?

Cheers,
Jim
1968 Australian Morris Mini fitted with a 1310cc A+ engine
14point7 WB, TunerStudio MS Ultra & MegaLogViewer HD
My Blog: http://www.jims-blog.com
Top
Sam280Z
Experienced MS/Extra'er
Posts: 200
Joined: Fri Jul 23, 2010 8:58 am

Re: Will Ms3 Ignition Knock & Realtime Clock fit with MS3X

Post by Sam280Z »

Yes.
___________________________________________________________
If nothing breaks, you're not trying hard enough...

Datsun 280Z
ITB
Turbo
MS3 + MS3X
Top
jb007
Helpful MS/Extra'er
Posts: 139
Joined: Sat Dec 04, 2010 1:49 am
Location: Melbourne, Australia
Contact:
Contact jb007

Re: Will Ms3 Ignition Knock & Realtime Clock fit with MS3X

Post by jb007 »

Sam280Z wrote:Yes.
Thanks, of to diyAutotune I go!
1968 Australian Morris Mini fitted with a 1310cc A+ engine
14point7 WB, TunerStudio MS Ultra & MegaLogViewer HD
My Blog: http://www.jims-blog.com
Top
walterclark1
Experienced MS/Extra'er
Posts: 292
Joined: Tue Jan 01, 2013 3:37 pm
Location: Dover, MA., USA

Re: Will Ms3 Ignition Knock & Realtime Clock fit with MS3X

Post by walterclark1 »

I have both, plus the Mapdaddy and TinyIOX. All mount and connect in different places.
A2 VW GTI 9A - MS3/3X
Top
jb007
Helpful MS/Extra'er
Posts: 139
Joined: Sat Dec 04, 2010 1:49 am
Location: Melbourne, Australia
Contact:
Contact jb007

Re: Will Ms3 Ignition Knock & Realtime Clock fit with MS3X

Post by jb007 »

Thanks all for the feedback. The items have now been packed and despatched on the long journey to Oz.

Jim :D
1968 Australian Morris Mini fitted with a 1310cc A+ engine
14point7 WB, TunerStudio MS Ultra & MegaLogViewer HD
My Blog: http://www.jims-blog.com
Top
Post Reply

Return to “Expansion boards”