JBperf injector driver board dead time

A forum for discussing the MegaSquirt related (but non-B&G) board development, assembly, installation, and testing.

Moderators: jsmcortina, muythaibxr

Post Reply
miragetbo1997cc
MS/Extra Newbie
Posts: 17
Joined: Tue May 31, 2011 1:36 pm
Location: Perris California

JBperf injector driver board dead time

Post by miragetbo1997cc »

I have an injector driver board as in the title. The question is about the dead times. Are they shorter then they would be without the driver board? And if so does anyone know the percentage of by how much? I'm running PTE 1000cc.
racingmini_mtl
Super MS/Extra'er
Posts: 9128
Joined: Sun May 02, 2004 6:51 am
Location: Quebec, Canada
Contact:

Re: JBperf injector driver board dead time

Post by racingmini_mtl »

Unfortunately, there is no magic number. The only way to have the correct value is to measure it with your actual injectors and drivers.

Jean
jbperf.com Main site . . . . . . . . . . . . . . . . . . . . . . jbperf.com Forum
Image
miragetbo1997cc
MS/Extra Newbie
Posts: 17
Joined: Tue May 31, 2011 1:36 pm
Location: Perris California

Re: JBperf injector driver board dead time

Post by miragetbo1997cc »

Ok. Thanks for the prompt reply
Post Reply