IObox 1.004 beta test
Moderators: jsmcortina, muythaibxr
-
- Site Admin
- Posts: 39587
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
IObox 1.004 beta test
IObox firmware 1.004 is available for testing.
This release zip includes four distinct "s19" firmware files.
iobox1.s19 - implements IObox #1 functionality to connect to MS3, does not include "Megasquirt-CAN".
iobox2.s19 - implements IObox #2 functionality to connect to MS3, does not include "Megasquirt-CAN".
iobox3.s19 - implements IObox #3 functionality to connect to MS3, does not include "Megasquirt-CAN".
iobox-ms2.s19 - implements IObox #1 functionality and includes "Megasquirt CAN" to allow use with MS2.
The main IObox firmware has Megasquirt-CAN support removed and only uses standard 11bit CAN at 500kbps. This should allow the IObox to be used on a CAN alongside devices (such as AEM UEGO) that broadcast with 29bit headers that could interfere with the IObox with the Megasquirt-CAN enabled.
Another benefit of this is that the IObox will no longer show up in the CAN devices tab in TunerStudio.
This new version can be found here: http://www.msextra.com/downloads/dev/iobox/
Please test if you can to confirm it is still working as expected.
James
This release zip includes four distinct "s19" firmware files.
iobox1.s19 - implements IObox #1 functionality to connect to MS3, does not include "Megasquirt-CAN".
iobox2.s19 - implements IObox #2 functionality to connect to MS3, does not include "Megasquirt-CAN".
iobox3.s19 - implements IObox #3 functionality to connect to MS3, does not include "Megasquirt-CAN".
iobox-ms2.s19 - implements IObox #1 functionality and includes "Megasquirt CAN" to allow use with MS2.
The main IObox firmware has Megasquirt-CAN support removed and only uses standard 11bit CAN at 500kbps. This should allow the IObox to be used on a CAN alongside devices (such as AEM UEGO) that broadcast with 29bit headers that could interfere with the IObox with the Megasquirt-CAN enabled.
Another benefit of this is that the IObox will no longer show up in the CAN devices tab in TunerStudio.
This new version can be found here: http://www.msextra.com/downloads/dev/iobox/
Please test if you can to confirm it is still working as expected.
James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
-
- Super MS/Extra'er
- Posts: 2637
- Joined: Tue Sep 14, 2004 4:17 pm
- Location: Aberdeen, Wa
Re: IObox 1.004 beta test
Thankyou for releasing this James. I don't have anything currently to test it on, if I did I would only be able to run studfnin test mode. The engine is currently at the machine sho
If others can test this it would be appriciated
If others can test this it would be appriciated
Volvo 940, 2jzge, MS3Pro, daily
240Z, 2JZ, MS3Pro boost control
240Z, 2JZ, MS3Pro boost control
-
- Helpful MS/Extra'er
- Posts: 96
- Joined: Fri Oct 14, 2011 10:06 am
- Location: Middle Tennessee
Re: IObox 1.004 beta test
Which IO box is this for?
1967 Mustang Coupe, 351w, S475 turbo, MS3.0 3x, c4, 8.8, ls coils, e85
-
- Site Admin
- Posts: 39587
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
Re: IObox 1.004 beta test
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
-
- Site Admin
- Posts: 39587
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
Re: IObox 1.004 beta test
Any feedback on this?
I'd like to promote it to 'stable'
James
I'd like to promote it to 'stable'
James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
-
- Super MS/Extra'er
- Posts: 1978
- Joined: Wed Apr 15, 2009 11:31 am
- Location: Oxford, PA
- Contact:
Re: IObox 1.004 beta test
I will give it a try once I get my transmission back in.
-
- Site Admin
- Posts: 39587
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
Re: IObox 1.004 beta test
Something else I just remembered. For full support of 2nd and 3rd IOboxes, you need the (unreleased) MS3 beta also.
James
James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
-
- Site Admin
- Posts: 39587
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
Re: IObox 1.004 beta test
As there have been no reports of problems I have promoted this to 'release'.
James
James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".