I have a hall sensor on a 36-1 trigger wheel, but I am ditching the distributor and converting to Ford EDIS.
It seems like all the trigger wheels I see for VR sensors have triangle-shaped teeth, rather than the square teeth on my 36-1 wheel. Does anyone know if a VR sensor will work on the trigger wheel I already have? It is one from DIYAutoTune, here: http://www.diyautotune.com/catalog/14-3 ... p-180.html
Should I buy the OEM VR sensor that comes off the car I grab the coils & module off of? It will probably all come out of the salvage yard.
Square tooth trigger wheel with VR sensor?
Moderators: jsmcortina, muythaibxr
-
- Helpful MS/Extra'er
- Posts: 106
- Joined: Sat Jul 07, 2012 8:18 am
- Location: Cypress (Houston), Texas
Square tooth trigger wheel with VR sensor?
Tuning in Houston, TX area
https://www.racebushings.com
https://www.racebushings.com
Re: Square tooth trigger wheel with VR sensor?
VR sensors are used with square-toothed wheels all the time... you should be fine.
Eric Law
1990 Audi 80 quattro with AAN turbo engine: happily running on MS3+MS3X
2012 Audi A4 quattro, desperately in need of tweaking
Be alert! America needs more lerts.
1990 Audi 80 quattro with AAN turbo engine: happily running on MS3+MS3X
2012 Audi A4 quattro, desperately in need of tweaking
Be alert! America needs more lerts.
-
- Super MS/Extra'er
- Posts: 17499
- Joined: Thu Apr 16, 2009 8:08 pm
Re: Square tooth trigger wheel with VR sensor?
We tested our square tooth wheels with Ford and Saturn VR sensors and had no problem.
Matt Cramer -1966 Dodge Dart slant six running on MS3X
-
- Helpful MS/Extra'er
- Posts: 106
- Joined: Sat Jul 07, 2012 8:18 am
- Location: Cypress (Houston), Texas
Re: Square tooth trigger wheel with VR sensor?
Cool, thanks guys. I should be cranking on it this evening.
Tuning in Houston, TX area
https://www.racebushings.com
https://www.racebushings.com