should I change my plug gap now wih EDIS?

Specifications, applications, part numbers, and prices for various OEM fuel injection components.

Moderators: jsmcortina, muythaibxr

Post Reply
skikir
Helpful MS/Extra'er
Posts: 86
Joined: Wed Feb 15, 2012 8:38 am

should I change my plug gap now wih EDIS?

Post by skikir »

I've changed out my TR6 from point to Ford EDIS. Should I increase the spark gap? Anything else I should think about?
1972 Triumph TR6
Dual Extrudabody ITBs
Megasquirt 2 extra/V3
Top
kjones6039
Super MS/Extra'er
Posts: 1986
Joined: Sat Jul 22, 2006 8:02 pm
Location: Eureka, NV USA
Contact:
Contact kjones6039

Re: should I change my plug gap now wih EDIS?

Post by kjones6039 »

What is your current gap?

Ken
1979 Corvette - 383 CID SBC w/ Holley Pro-Jection 900 CFM TBI, 4-85 lb lo-z injectors & Walbro 255 pump
MS2 v3 w/extra 3.4.2 Release
36-1, Delphi LS2/7 coils in wasted spark, driven by v2.0 logic board from JBPerformance
Spartan Lambda Sensor from 14point7
TinyIOX from JBPerformance
Top
DaveEFI
Super MS/Extra'er
Posts: 4175
Joined: Sun Apr 15, 2012 12:55 am
Location: SW London, UK

Re: should I change my plug gap now wih EDIS?

Post by DaveEFI »

skikir wrote:I've changed out my TR6 from point to Ford EDIS. Should I increase the spark gap? Anything else I should think about?
Have you changed the plugs to a resistor type? EDIS seems to need these. Try 35 thou. as a gap.
Rover SD1 3.5 EFI
MS2 V3
EDIS
Tech Edge O2
London UK.
Top
Post Reply

Return to “OEM EFI Hardware”