Hi
Can anyone tell me if the single timing mark on the pulley is TDC or 10 deg BTDC?
Thanks in advance
Patrick
VAG 1.8T Audi VW
Moderators: jsmcortina, muythaibxr
-
lotus23C
- Helpful MS/Extra'er
- Posts: 130
- Joined: Sun Apr 22, 2012 1:20 am
- Location: New Zealand
- Contact:
VAG 1.8T Audi VW
Currently Lotus 23C replica Audi 1.8T MS 2 v3 Sequential COP and ignition.
Lotus 7 replica 4age 20V blacktop MS2 v3
Lotus 7 replica 4age 20V blacktop MS2 v3
-
24c
- Master MS/Extra'er
- Posts: 847
- Joined: Tue Jan 20, 2009 10:21 am
- Location: Lancashire UK
- Contact:
Re: VAG 1.8T Audi VW
Hi lotus23C
Somewhere deep in the grey stuff, I remember doing a timing belt, so when the notch in the crankshaft pulley is aligned with the dimple in the cover above the pulley, the engine is at TDC, but why not take a plug out & look in the hole with a torch or use a "stick", and turn the engine with a spanner and check for TDC pulley alignment that way.
Mike
Somewhere deep in the grey stuff, I remember doing a timing belt, so when the notch in the crankshaft pulley is aligned with the dimple in the cover above the pulley, the engine is at TDC, but why not take a plug out & look in the hole with a torch or use a "stick", and turn the engine with a spanner and check for TDC pulley alignment that way.
Mike
Yamaha GTS1000 v2 MicroSquirt, B&G 2.891
Yamaha GTS1000 v3 beta MicroSquirt, B&G3.760
Yamaha GTS1000 MSExtra 3.1, Dual VR Board
Yamaha YZF1000 MSExtra 3.1
Yamaha GTS1000 v3 beta MicroSquirt, B&G3.760
Yamaha GTS1000 MSExtra 3.1, Dual VR Board
Yamaha YZF1000 MSExtra 3.1
Re: VAG 1.8T Audi VW
I'm pretty sure it's TDC
Linfert Performance/321 Motorsports
SCCA 2019 SM National Champion Crew Chief
SCCA 2023 FP National Champion Tuner/electrical engineer
100s of MS systems built installed and tuned
Support the developers!
SCCA 2019 SM National Champion Crew Chief
SCCA 2023 FP National Champion Tuner/electrical engineer
100s of MS systems built installed and tuned
Support the developers!