Recomend a throttle body (europe)

Specifications, applications, part numbers, and prices for various OEM fuel injection components.

Moderators: jsmcortina, muythaibxr

Post Reply
luke2152
Helpful MS/Extra'er
Posts: 132
Joined: Sat Jun 07, 2014 7:41 am

Recomend a throttle body (europe)

Post by luke2152 »

I'm doing drive by wire to drive by cable conversion along with MS2 on 4.2 audi v8 (in an a6). Need recomendation on an oem donor throttle body. Needs to be around 80mm and ideally have some kind of IAC valve although there are ways around this. Jag XJ8? Rover V8? Skyline? Supra? Something else? Also seen brand new chinese universal ones on ebay which look simple and cheap has anyone had experience with these?
luke2152
Helpful MS/Extra'er
Posts: 132
Joined: Sat Jun 07, 2014 7:41 am

Re: Recomend a throttle body (europe)

Post by luke2152 »

Well having investigated a bit further I can't find any stock throttle body bigger then 65mm except the nissan q45 (which isn't available in europe but I guess I could find one off ebay USA). Can anyone think of another large stock one?

Alternatively here are the cheap aftermarket ones I mentioned - anyone used similar?
http://www.ebay.co.uk/itm/NISSAN-SKYLIN ... 35d1c9eba3
Post Reply