Hi,
I'm now thoroughly confused by the Delphi connector types. 150 Series, GT 150 Series, Metripack 150...
The MS documents mention the connector for the LS2 as part number 15439568, available at Mouser. To make matters more confusing, Mouser calls this a 150 Series and a 280 Series. Elsewhere it shows up as a GT 150. The data sheet links don't work and a general search for 15439568 turns up nothing from Delphi.
Does anyone know exactly which connector is required for the LS2 coil? I want to make sure I order the correct terminals and lay hands on the correct crimper.
Thanks.
Connectors for LS2 coils??
Moderators: jsmcortina, muythaibxr
-
- Experienced MS/Extra'er
- Posts: 201
- Joined: Sun Mar 16, 2014 3:41 pm
-
- Master MS/Extra'er
- Posts: 617
- Joined: Mon Oct 29, 2012 2:34 am
- Location: Brisbane Australia
- Contact:
Re: Connectors for LS2 coils??
I have 514A ls2 (non truck) coils and use these connectors:
http://www.ebay.com.au/itm/Set-4-GM-Coi ... 33882e1005
http://www.ebay.com.au/itm/Set-4-GM-Coi ... 33882e1005
RX7 Series 2 13B Turbo. Megasquirt 3 with 3X Expander and V3 CPU. Firmware 1.4.1
Knock module, twin EGT, real time clock, WBO2, full sequential fuel and spark
http://web.aanet.com.au/arran
Knock module, twin EGT, real time clock, WBO2, full sequential fuel and spark
http://web.aanet.com.au/arran
Re: Connectors for LS2 coils??
they also can be purchased as a pigtail on ebay
-
- Experienced MS/Extra'er
- Posts: 201
- Joined: Sun Mar 16, 2014 3:41 pm
Re: Connectors for LS2 coils?? - SOLVED
Hi,
I believe I have resolution on this, after a couple of calls to Mouser and Delphi.
This connector is a GT 150 series item. The correct part number is indeed what the MS sequencer documentation says - 15439568. While it does not appear in Delphi's GT 150 catalog, it is a current part. With this number, you can find terminals, seals and the TPA lock.
There are other variants that look very similar but the keying is different.
Hope this proves useful.
I believe I have resolution on this, after a couple of calls to Mouser and Delphi.
This connector is a GT 150 series item. The correct part number is indeed what the MS sequencer documentation says - 15439568. While it does not appear in Delphi's GT 150 catalog, it is a current part. With this number, you can find terminals, seals and the TPA lock.
There are other variants that look very similar but the keying is different.
Hope this proves useful.
Re: Connectors for LS2 coils??
Hi
Hope I can barrow this thread for my question.
I live in Sweden so it's hard to find information here.
I have got 8 coils from a Trailblazer that I plan to put in my Chevy BB with MS3X/V3.0.
My problem is to find the right connectors to my coils.
Hope someone can help me in this forum.
Here are two pictures how they look.
I really appreciates all the help I can get.
/bosv
Hope I can barrow this thread for my question.
I live in Sweden so it's hard to find information here.
I have got 8 coils from a Trailblazer that I plan to put in my Chevy BB with MS3X/V3.0.
My problem is to find the right connectors to my coils.
Hope someone can help me in this forum.
Here are two pictures how they look.
I really appreciates all the help I can get.
/bosv
Re: Connectors for LS2 coils??
I show 829-15439568 Mouser for the connector for my LS2 DS514A coils.
I believe there are several models for the LS2 coil, for instance a LS2 "Truck" coil. I found this out when investigating dwell for the LS2 coils. Possibly LS2 is a bit genetic. You might try Rock Auto to search for the vehicle that has the model of LS2 coil you have and that might lead to a connector number.
I believe there are several models for the LS2 coil, for instance a LS2 "Truck" coil. I found this out when investigating dwell for the LS2 coils. Possibly LS2 is a bit genetic. You might try Rock Auto to search for the vehicle that has the model of LS2 coil you have and that might lead to a connector number.
1970 Chevelle, 540 big block, AFR heads, headers, mild cam
MS3 release 1.4.0, sequential fuel, LS2 coil per plug
Tuner Studio MS V3.0.05
MS3 release 1.4.0, sequential fuel, LS2 coil per plug
Tuner Studio MS V3.0.05
-
- Experienced MS/Extra'er
- Posts: 338
- Joined: Thu Oct 20, 2016 9:12 pm
- Location: Manassas, Virginia
Re: Connectors for LS2 coils??
Crimp Connector Set:
https://www.bmotorsports.com/shop/produ ... 6th31rkkg3
Pigtail Connector:
https://www.bmotorsports.com/shop/produ ... 6th31rkkg3
These will fit your coils.
https://www.bmotorsports.com/shop/produ ... 6th31rkkg3
Pigtail Connector:
https://www.bmotorsports.com/shop/produ ... 6th31rkkg3
These will fit your coils.
I'm in the VA/DC area! Let me know if I can help you locally! I offer tuning and troubleshooting services.
http://www.msextra.com/forums/viewtopic ... 37&t=64269
Email me directly at CRSTune@gmail.com
Personal Vehicle:
'92 Nissan 240sx, KA24DET, GT2860RS, MS3X, Coil-on-Plug
http://www.msextra.com/forums/viewtopic ... 37&t=64269
Email me directly at CRSTune@gmail.com
Personal Vehicle:
'92 Nissan 240sx, KA24DET, GT2860RS, MS3X, Coil-on-Plug