Any recommended Throttlebody 3"+ with built in ICV
Moderators: jsmcortina, muythaibxr
Any recommended Throttlebody 3"+ with built in ICV
As topic says.
I need a Throttlebody for my future 24v VR6 project, and I want one with built in ICV that MS3X can control.
I need a Throttlebody for my future 24v VR6 project, and I want one with built in ICV that MS3X can control.
-MS3X, (V3 PCB) 1.2 RC 1 firmware. Controlling a light modified Audi 1.8TQ AEB 20v engine with Holset HE221W turbo, 299.4 HP and 400Nm at the hubs in Dynapack.
-
- Super MS/Extra'er
- Posts: 2639
- Joined: Tue Sep 14, 2004 4:17 pm
- Location: Aberdeen, Wa
Re: Any recommended Throttlebody 3
I like to tune using pwm style idle motors. First thing that comes to mind is any 5.0 mustang will have it built in and plenty of sizes and brands avaialable for that motor
One thing to look out for it throttle pull direction
One thing to look out for it throttle pull direction
Volvo 940, 2jzge, MS3Pro, daily
240Z, 2JZ, MS3Pro boost control
240Z, 2JZ, MS3Pro boost control
-
- Super MS/Extra'er
- Posts: 884
- Joined: Sat Apr 30, 2011 12:34 pm
- Location: Sandefjord, Norway
Re: Any recommended Throttlebody 3"+ with built in ICV
Not many Mustangs this side of the pond...
Joachim
1974 Jensen-Healey
1990 VW Caravelle Syncro - running MS3+X
2014 Ford Fiesta EcoBoost
1974 Jensen-Healey
1990 VW Caravelle Syncro - running MS3+X
2014 Ford Fiesta EcoBoost
Re: Any recommended Throttlebody 3
Can you order from Summit?
http://www.summitracing.com/oh/parts/su ... /overview/
75mm (2.95"), built in prep for IAC valve and TPS (neither are included), both of which are directly compatible with MS.
http://www.summitracing.com/oh/parts/su ... /overview/
75mm (2.95"), built in prep for IAC valve and TPS (neither are included), both of which are directly compatible with MS.
Re: Any recommended Throttlebody 3
Seems like a good alternative!
I'll just check out ebay for a complete one.
I'll just check out ebay for a complete one.
-MS3X, (V3 PCB) 1.2 RC 1 firmware. Controlling a light modified Audi 1.8TQ AEB 20v engine with Holset HE221W turbo, 299.4 HP and 400Nm at the hubs in Dynapack.
Re: Any recommended Throttlebody 3
Do you think this one will fit for a mustang? I'd like to stick with Bosch Style connectors as long as possible.
http://www.ebay.com/itm/1x-LEERLAUFREGE ... c4&vxp=mtr
http://www.ebay.com/itm/1x-LEERLAUFREGE ... c4&vxp=mtr
-MS3X, (V3 PCB) 1.2 RC 1 firmware. Controlling a light modified Audi 1.8TQ AEB 20v engine with Holset HE221W turbo, 299.4 HP and 400Nm at the hubs in Dynapack.
-
- Super MS/Extra'er
- Posts: 2639
- Joined: Tue Sep 14, 2004 4:17 pm
- Location: Aberdeen, Wa
Re: Any recommended Throttlebody 3
I have found so far that any ford iac swaps over, there is just differences in motor style and connector location. Look for something bbk if you can, all of there throttle body's come stock with oring shafts. A buddy had that summit one and it whistled pretty bad through the throttle shaft till we oringed it
Volvo 940, 2jzge, MS3Pro, daily
240Z, 2JZ, MS3Pro boost control
240Z, 2JZ, MS3Pro boost control
Re: Any recommended Throttlebody 3
BBK?
-MS3X, (V3 PCB) 1.2 RC 1 firmware. Controlling a light modified Audi 1.8TQ AEB 20v engine with Holset HE221W turbo, 299.4 HP and 400Nm at the hubs in Dynapack.
-
- Super MS/Extra'er
- Posts: 2639
- Joined: Tue Sep 14, 2004 4:17 pm
- Location: Aberdeen, Wa
Re: Any recommended Throttlebody 3
BBK is a brand name
Volvo 940, 2jzge, MS3Pro, daily
240Z, 2JZ, MS3Pro boost control
240Z, 2JZ, MS3Pro boost control
Re: Any recommended Throttlebody 3
OK, sorry, not familiar with US cars really :p
-MS3X, (V3 PCB) 1.2 RC 1 firmware. Controlling a light modified Audi 1.8TQ AEB 20v engine with Holset HE221W turbo, 299.4 HP and 400Nm at the hubs in Dynapack.
Re: Any recommended Throttlebody 3
This one maybe? http://www.ebay.com/itm/BBK-1514-Thrott ... 65&vxp=mtr
Will 80mm suffer from low rpm drivability?
Will 80mm suffer from low rpm drivability?
-MS3X, (V3 PCB) 1.2 RC 1 firmware. Controlling a light modified Audi 1.8TQ AEB 20v engine with Holset HE221W turbo, 299.4 HP and 400Nm at the hubs in Dynapack.
-
- Super MS/Extra'er
- Posts: 2639
- Joined: Tue Sep 14, 2004 4:17 pm
- Location: Aberdeen, Wa
Re: Any recommended Throttlebody 3
It's no problem, sometimes I forget this is a worldwide board, which I think is great as diverse information gets about
What size is the engine? You can mask the to large or throttle body syndrome with a progressive type spool. When I have to modify a spool, I work it out where 1/2 pedal throttle is 1/4 throttle body movement, then it Gos wot after that
What size is the engine? You can mask the to large or throttle body syndrome with a progressive type spool. When I have to modify a spool, I work it out where 1/2 pedal throttle is 1/4 throttle body movement, then it Gos wot after that
Volvo 940, 2jzge, MS3Pro, daily
240Z, 2JZ, MS3Pro boost control
240Z, 2JZ, MS3Pro boost control
Re: Any recommended Throttlebody 3
It's a 2.8 24v VR6, originally from Seat Leon Cupra R. 204hp. Will be boosted to about 700hp.
I see, I was first thinking of trying to adopt my oem throttle cable connection, but an offset wheel would probably solve the drivability issue, if there is any.
I see, I was first thinking of trying to adopt my oem throttle cable connection, but an offset wheel would probably solve the drivability issue, if there is any.
-MS3X, (V3 PCB) 1.2 RC 1 firmware. Controlling a light modified Audi 1.8TQ AEB 20v engine with Holset HE221W turbo, 299.4 HP and 400Nm at the hubs in Dynapack.
Re: Any recommended Throttlebody 3
Mine whistles like crazy...I'll check the throttle shaft!nathaninwa wrote:A buddy had that summit one and it whistled pretty bad through the throttle shaft till we oringed it
-
- Super MS/Extra'er
- Posts: 2639
- Joined: Tue Sep 14, 2004 4:17 pm
- Location: Aberdeen, Wa
Re: Any recommended Throttlebody 3
What caught our attention first was during a boost leak test, the tps was bubbling!Laminar wrote:Mine whistles like crazy...I'll check the throttle shaft!nathaninwa wrote:A buddy had that summit one and it whistled pretty bad through the throttle shaft till we oringed it
That 80mm might be a big large. I'm running 3 inch piping all the way with a 70mm throttle body. It has a 3 inch coupling diameter so it flows to the eye, and internally I put it on the lathe and tapered the entry for better flow. I had to reduce the throttle change off idle with the spool to stop the motor from flaring up while taking off from a stop. Mines a 3.0L and makes over 800whp with the choke point being the turbine housing and back pressure sky rocketing
On a side note, a buddy with form of gt35 made almost 830whp in an Evo with 2.5 inch piping and stock 65mm throttle body. When he went to 3 inch and a 75mm throttle power went to 880 iirc, so it's not that much of a restriction
Volvo 940, 2jzge, MS3Pro, daily
240Z, 2JZ, MS3Pro boost control
240Z, 2JZ, MS3Pro boost control
Re: Any recommended Throttlebody 3
Ok, I think I'll go for the 70mm instead then, then all the piping and hoses can be done with 3" OD/ID. Seems plenty enough for me. Thanks for the advice!
-MS3X, (V3 PCB) 1.2 RC 1 firmware. Controlling a light modified Audi 1.8TQ AEB 20v engine with Holset HE221W turbo, 299.4 HP and 400Nm at the hubs in Dynapack.
-
- Master MS/Extra'er
- Posts: 706
- Joined: Sat Mar 17, 2012 10:13 pm
Re: Any recommended Throttlebody 3
I run 75mm Wilson manifold ford mustangs throttle body on my vr6 12v with a short runner intake and it idles fine
98 VW golf gti vr6 turbo 8:5:1 cr ported and polished full ferrea race valves train 276 cams custom short runner intake Borge 366 sx-e turbo forge wossner pistons, balanced rotating mass, limited slip 6 speed deka 750Lbs injectors on ms3pro completed AWD swap