Can anyone help me out with voltage vs. pressure on this map sensor?
It was located inside the ECU box soldered directly to the board.
Bosch on-board MAP sensor (1267632015) voltage vs. pressure?
Moderators: jsmcortina, muythaibxr
-
- Helpful MS/Extra'er
- Posts: 108
- Joined: Mon Oct 19, 2015 7:04 am
Re: Bosch on-board MAP sensor (1267632015) voltage vs. press
maybe this (200kPa) one:
http://www.farnell.com/datasheets/49036.pdf
http://www.farnell.com/datasheets/49036.pdf
-
- Helpful MS/Extra'er
- Posts: 108
- Joined: Mon Oct 19, 2015 7:04 am
Re: Bosch on-board MAP sensor (1267632015) voltage vs. press
Not sure, I found that pdf the other day too, but part numbers are at not matching, so not sure.
Re: Bosch on-board MAP sensor (1267632015) voltage vs. press
Most Bosch partnr's start with a 0.
The number youre revering to could be the part number from a car manufacturer.
Live would be much easier and cheaper if they all used the same number for identical parts
The number youre revering to could be the part number from a car manufacturer.
Live would be much easier and cheaper if they all used the same number for identical parts
-
- Helpful MS/Extra'er
- Posts: 108
- Joined: Mon Oct 19, 2015 7:04 am
Re: Bosch on-board MAP sensor (1267632015) voltage vs. press
Ok. The other file linked to was for 250 and 300kPa sensors.
I found this today (http://datasheet.seekic.com/datasheet/0273003204.html#), which have the curves for 105kPa and 200kPa sensors.
Just for reference.
What I found in the end is the following:
-------------------------
Trykksensor 105 kPa
273003203
Spenning Trykk
[V] [kPa]
0 12.45
0.4 20.00
4.9 105.00
5 106.89
-------------------------
-------------------------
Trykksensor 200 kPa
273003204
Spenning Trykk
[V] [kPa]
0 10.13
0.25 20.02
4.8 200.02
5 207.93
-------------------------
-------------------------
Trykksensor 250 kPa
273003210
Spenning Trykk
[V] [kPa]
0 10.00
0.2 20.00
4.8 250.00
5 260.00
-------------------------
-------------------------
Trykksensor 300 kPa
273003211
Spenning Trykk
[V] [kPa]
0 -6.36
0.4 20.00
4.65 300.00
5 323.05
-------------------------
I found this today (http://datasheet.seekic.com/datasheet/0273003204.html#), which have the curves for 105kPa and 200kPa sensors.
Just for reference.
What I found in the end is the following:
-------------------------
Trykksensor 105 kPa
273003203
Spenning Trykk
[V] [kPa]
0 12.45
0.4 20.00
4.9 105.00
5 106.89
-------------------------
-------------------------
Trykksensor 200 kPa
273003204
Spenning Trykk
[V] [kPa]
0 10.13
0.25 20.02
4.8 200.02
5 207.93
-------------------------
-------------------------
Trykksensor 250 kPa
273003210
Spenning Trykk
[V] [kPa]
0 10.00
0.2 20.00
4.8 250.00
5 260.00
-------------------------
-------------------------
Trykksensor 300 kPa
273003211
Spenning Trykk
[V] [kPa]
0 -6.36
0.4 20.00
4.65 300.00
5 323.05
-------------------------