I wouldnt use them..
had issues with them with methanol and heat drastically altering the flow rate (the internals swell)
Bosch CNG injectors fuel compatibility?
Moderators: jsmcortina, muythaibxr
-
- Master MS/Extra'er
- Posts: 548
- Joined: Fri Dec 10, 2010 4:41 pm
Re: Bosch CNG injectors fuel compatibility?
I know about the 1700s temperature problems; I was going to run the 2200s. ID has all the characterization information on their website but I'm not paying them four times as much for the same injector.
Funny enough they look like they'll handle the lower right portion of the VE table better than the 65lb units I run now!
Funny enough they look like they'll handle the lower right portion of the VE table better than the 65lb units I run now!
-
- Super MS/Extra'er
- Posts: 1978
- Joined: Wed Apr 15, 2009 11:31 am
- Location: Oxford, PA
- Contact:
Re: Bosch CNG injectors fuel compatibility?
I bench tested some non id 2200s and they were fine with straight methanol.
Re: Bosch CNG injectors fuel compatibility?
use only stainless internals injecotors with methanol etc. any of the cng injectors with viton internal seals will give issues at some stage, its just a matter of time
Re: Bosch CNG injectors fuel compatibility?
OP
So how did the Bosch injectors work out with Methanol?
So how did the Bosch injectors work out with Methanol?