Bosch CNG injectors fuel compatibility?

Specifications, applications, part numbers, and prices for various OEM fuel injection components.

Moderators: jsmcortina, muythaibxr

jamies
Master MS/Extra'er
Posts: 523
Joined: Tue Apr 07, 2009 12:22 am

Re: Bosch CNG injectors fuel compatibility?

Post by jamies »

I wouldnt use them..
had issues with them with methanol and heat drastically altering the flow rate (the internals swell)
Rick Finsta
Master MS/Extra'er
Posts: 548
Joined: Fri Dec 10, 2010 4:41 pm

Re: Bosch CNG injectors fuel compatibility?

Post by Rick Finsta »

I know about the 1700s temperature problems; I was going to run the 2200s. ID has all the characterization information on their website but I'm not paying them four times as much for the same injector.

Funny enough they look like they'll handle the lower right portion of the VE table better than the 65lb units I run now!
Paul_VR6
Super MS/Extra'er
Posts: 1978
Joined: Wed Apr 15, 2009 11:31 am
Location: Oxford, PA
Contact:

Re: Bosch CNG injectors fuel compatibility?

Post by Paul_VR6 »

I bench tested some non id 2200s and they were fine with straight methanol.
-Paul
1992 Corrado SLC 3.6 VR6 11.38@120 - MS3 Pro Ultimate - Microsquirt I/O - Can EGT - Racepak IQ3s
kptuned.com - Megasquirting the World! Megasquirt Sales, Service, Tuning and More!
Image
jamies
Master MS/Extra'er
Posts: 523
Joined: Tue Apr 07, 2009 12:22 am

Re: Bosch CNG injectors fuel compatibility?

Post by jamies »

use only stainless internals injecotors with methanol etc. any of the cng injectors with viton internal seals will give issues at some stage, its just a matter of time
59F100
MS/Extra Newbie
Posts: 6
Joined: Sun Mar 16, 2014 10:46 am

Re: Bosch CNG injectors fuel compatibility?

Post by 59F100 »

OP
So how did the Bosch injectors work out with Methanol?
Post Reply