Saw a wiki on sloppy mechanic on grinding off the small orfice plate on factor GM injectors to bring the flow rate from 24lbs to 60+. I flowed a set of injectors after they were decapped.
Seems to be quite the delta from min to max. If you have several sets one could match up 8. Units are in grams/min.
Sent from my SM-G920V using Tapatalk
Decapping injectors
Moderators: jsmcortina, muythaibxr
Decapping injectors
306 SBFord, Torquer II EFI intake, 60 lbs injectors, 8 LS2 coils, VS Racing 7668 turbo, 4R70W, MS3x fw1.4 w/built in trans controller.