Gen VI CKP Sensor Position

Specifications, applications, part numbers, and prices for various OEM fuel injection components.

Moderators: jsmcortina, muythaibxr

Post Reply
bbpanel
MS/Extra Newbie
Posts: 1
Joined: Mon Oct 30, 2017 8:50 pm

Gen VI CKP Sensor Position

Post by bbpanel »

Hi, new here and hoping folks can help me out. I'm installing a GM L21 24x reluctor using a Gen VI timing cover on my Mark IV BBC. Here is a pic of the position of the reluctor looking through the sensor hole. I need to know if the reluctor needs to be centered on the sensor or if the slight off-center position pictured is ok. It is a oem sensor/reluctor. Since this is the "OEM EFI Hardware" section I'm hoping someone can help. Perhaps someone has a L29 BBC and has seen/noticed the position of the reluctor? Thanks. -Bob
jO3X6xhh.jpg
jO3X6xhh.jpg (108.13 KiB) Viewed 787 times
Post Reply