EDIS 4 coil.

Here is where you can discuss with other MegaSquirter's various automotive (but non-MegaSquirt) topics. Threads will be removed if they aren't posted to for 10 days.

Moderators: jsmcortina, muythaibxr

EDIS 4 coil.

Postby DaveEFI » Fri Apr 07, 2017 1:49 am

Pal has had (we think) an EDIS4 coil fail. He's a long way off, so I've not seen it myself.

One cylinder of a pair appears not to be firing at all. Which sort of doesn't make sense to me. But swapping the coils - it's an eight cylinder - moves the fault too.
Any guesses what could cause this? The resistance readings of the coil seem normal at about 1 ohm primary, 30,000 ohms secondary.
Rover SD1 3.5 EFI
MS2 V3
EDIS
Tech Edge O2
London UK.
DaveEFI
Super MS/Extra'er
 
Posts: 2428
Joined: Sun Apr 15, 2012 12:55 am

Re: EDIS 4 coil.

Postby billr » Fri Apr 07, 2017 7:48 am

One coil tower, or its approximate end of the secondary winding, could be shorted to ground. It may be a high resistance "short" that you would need a megger to find.
billr
Super MS/Extra'er
 
Posts: 4226
Joined: Sun May 15, 2011 11:41 am
Location: Walnut Creek, Calif. USA


Return to The Extra Pits

Who is online

Users browsing this forum: No registered users and 1 guest