Alpha test: IAW Weber-Marelli

Post by **jsmcortina** » Tue Apr 17, 2007 3:16 pm

Post info and test results here

Post by **jsmcortina** » Fri Aug 10, 2007 3:28 pm

Any Lancia / Cosworth testers yet?

James

risu · Post by **risu** » Mon Aug 13, 2007 4:02 am

I've planned to test this for a while already but haven't had time to make necessary pcb which allows me to use original marelli connector + has marelli-style vr-input circuits. I'll report here as soon as I get there.

Chopper · Post by **Chopper** » Fri Dec 21, 2007 8:13 am

I'm about to give this a go, but would like to confirm a couple of things first. By selecting the IAW wheel pattern, is the processor automatically looking for a 2nd trigger input on JS10? The other slightly confusing thing is boost control. I have it on wired from JS2, but the drop down menu has IAC pin A, IAC pin B, JS11 or Fidle. My best guess was IAC pin A - could someone confirm that or put me right? I've looked at the documentation, but the terms used are a bit different from MegaTune.

Guy.

Post by **jsmcortina** » Fri Dec 21, 2007 1:44 pm

Chopper wrote:I'm about to give this a go, but would like to confirm a couple of things first. By selecting the IAW wheel pattern, is the processor automatically looking for a 2nd trigger input on JS10?

Yes

The other slightly confusing thing is boost control. I have it on wired from JS2,

On the bottom of my V3 board it says (2A) next to JS2 - this means IAC2A.

(However... there is a mixup somewhere in the schematics/original MS2 code/ Megatune that swaps IAC1 and IAC2.)

James