anyone notice odd MAT behavior?

This is a forum for discussing the development and testing of alpha MS2/Extra code. Documentation
(Runs on MS2 and Microsquirt)

Moderators: jsmcortina, muythaibxr

Post Reply
Keithg
Super MS/Extra'er
Posts: 2413
Joined: Sun Mar 06, 2005 9:15 am
Location: Chicago, IL, USA
Contact:
Contact Keithg

anyone notice odd MAT behavior?

Post by Keithg »

I have seen this before and attributed it to a bad mat connection. It seems to only be apparent at certain MAT ranges, though. MAT will oscillate around, then stabilize. look at time 86656. I will reinvestigate my wiring, but it seems odd that it only acts up at certain temps and I have never seen this on the same board/harness with MS1. Just wondering if anyone else has seen this.

http://ys3al35l.googlepages.com/datalog200708030813.xls

KeithG
Top
Keithg
Super MS/Extra'er
Posts: 2413
Joined: Sun Mar 06, 2005 9:15 am
Location: Chicago, IL, USA
Contact:
Contact Keithg

Post by Keithg »

found a pin had pushed out of my plug to the MAT sensor. THis should fis this problem. Wiring as I suspected.

KeithG
Top
Post Reply

Return to “MS2/Extra Development”