Cranking timing with basic trigger

This is a forum for discussing the development and testing of alpha MS2/Extra code. Documentation
(Runs on MS2 and Microsquirt)

Moderators: jsmcortina, muythaibxr

Post Reply
teg
Experienced MS/Extra'er
Posts: 291
Joined: Sun Sep 05, 2004 2:02 pm
Location: Finland

Post by teg »

One thing that doesn't work is cranking timing with basic trigger. Any number I set there, will reduce timing - actual timing will be value_from_map - cranking_timing
Opel Kadett C City 2.0 16V Turbo
jsmcortina
Site Admin
Posts: 39585
Joined: Mon May 03, 2004 1:34 am
Location: Birmingham, UK
Contact:

Post by jsmcortina »

I don't see how this can be, the code specifically chooses the map or the cranking timing.

I'll re-check this on the scope when I get chance.

James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk

My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
Post Reply