Hi!
If I correclty interpret following log, ASE doesn't affect to PW. Gwarm is up to 200% but PW is same as in ~140%.
Using Beta9
MSQ: http://www.diodi.net/files/ms2/megasqui ... 191736.msq
ASE does not affect to PW?
Moderators: jsmcortina, muythaibxr
ASE does not affect to PW?
Opel Kadett C City 2.0 16V Turbo
-
- Site Admin
- Posts: 8230
- Joined: Thu Oct 14, 2004 12:48 pm
-
- Site Admin
- Posts: 39615
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
Could you post the full datalog please. I need to see the idle pulsewidth once Gwarm is down to 100%.
James
James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
Hmm. Maybe PW is correct, later in that log (near 115%) PW is 2,5ms?
I thought that Gwarm includes ASE when it acts like that...
Log: http://www.diodi.net/files/ms2/datalog2 ... dstart.xls
I thought that Gwarm includes ASE when it acts like that...
Log: http://www.diodi.net/files/ms2/datalog2 ... dstart.xls
Opel Kadett C City 2.0 16V Turbo