neon.. MS1 or MS2?

This is a forum for discussing the development and testing of alpha MS2/Extra code. Documentation
(Runs on MS2 and Microsquirt)

Moderators: jsmcortina, muythaibxr

Post Reply
2.4tneon
Helpful MS/Extra'er
Posts: 98
Joined: Thu Jan 26, 2006 12:37 pm
Location: new port richey, FL

neon.. MS1 or MS2?

Post by 2.4tneon »

i have a 2.4 swapped into my neon. and i have MS wired up and i have both MS2 and MS1 and i was wondering if i should just set up the MS1 cause the code works.. or use the MS2 let me know what you think. thanks
Image
jsmcortina
Site Admin
Posts: 39585
Joined: Mon May 03, 2004 1:34 am
Location: Birmingham, UK
Contact:

Post by jsmcortina »

Given that there are some known issue with MS2 Neon code at the moment and you already have an MS1 I would suggest you use that. The spark wiring is the same for both codes so swapping should be relatively simple once we've got the MS2 issues nailed down.

James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk

My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
Tjabo
Master MS/Extra'er
Posts: 846
Joined: Sat Nov 05, 2005 7:36 pm

Post by Tjabo »

Hey James, sorry I forgot to give you your props in the other thread! :oops: :lol:

We, in the Neon community who want to take advantage of the greatness MS2/E has to offer, appreciate your efforts on the code IMMENSELY! ! !

Thanks!

Thad
Post Reply