Any reason this launch circuit won't work with MS2?
Moderators: jsmcortina, muythaibxr
Any reason this launch circuit won't work with MS2?
Except go to JS5 instead of the MS1 default?
1992 BMW 525i M50 Non Vanos 24v Turbocharged
Stock COP Wasted Spark
MS2/E v3
Stock COP Wasted Spark
MS2/E v3
-
- Helpful MS/Extra'er
- Posts: 54
- Joined: Thu Apr 19, 2007 8:00 pm
- Location: northern Japan
- Contact:
That should work OK. I'd add a small capacitor across the switch leads (maybe 10nF-100nF), this will keep the switch from "bouncing" when it opens and closes, and cut down on noise transients too. Put the capacitor as close to the MS-II as you can; between JS5 and ground inside the MS case would be ideal.