MS2 Sequencer
Moderators: jsmcortina, muythaibxr
MS2 Sequencer
It's coming along it seems, and I am very very pumped about it. How long after its release until MS2/E will work on it? I know I am asking a greedy question - I just cannot wait until its out and I can have 6 seq fuel and spark with more outputs and stuff. Oh man!
1992 BMW 525i M50 Non Vanos 24v Turbocharged
Stock COP Wasted Spark
MS2/E v3
Stock COP Wasted Spark
MS2/E v3
-
- Experienced MS/Extra'er
- Posts: 272
- Joined: Mon Oct 03, 2005 11:26 pm
- Location: Delta, BC, Canada
My guess is that it depends on the changes required on the injector outputs - it sounds like the sequencer might want the injector outputs to behave differently than running on its own (Microsquirt without the sequencer).
BTW, I have created a thread on the feasibility of having a Microsquirt variant for MS2/Extra in the Expansion board forum - I feel that the Microsquirt is great platform with a restricted feature set. If only those spare pins are hooked up to extra built-in circuits we would have a smaller integrated board running MS2/Extra vs using something like SMD 3.57 which is still compatible to both MS-I and MS-II.
BTW, I have created a thread on the feasibility of having a Microsquirt variant for MS2/Extra in the Expansion board forum - I feel that the Microsquirt is great platform with a restricted feature set. If only those spare pins are hooked up to extra built-in circuits we would have a smaller integrated board running MS2/Extra vs using something like SMD 3.57 which is still compatible to both MS-I and MS-II.