Running the latest beta.
On the KTM single, we are running N-alpha for primary load. I have noticed if TPS goes negative, the code seamed to roll over at a load of 65,000 %. This of course puts it at the 100% timing and fueling values . I have trouble keeping the TPS from reading at least slightly negative at times.
Load "Bug" when running aplha n?
Moderators: jsmcortina, muythaibxr
Load "Bug" when running aplha n?
86 Rx-7, swapped to 2.3 ford turbo (BW EFR 6758), ms3/ms3x sequential fuel /waste spark, ls2 coils
88 Tbird 2.3t, Microsquirt Module (PIMP), TFI ignition
88 Tbird 2.3t, Microsquirt Module (PIMP), TFI ignition
-
- Site Admin
- Posts: 8230
- Joined: Thu Oct 14, 2004 12:48 pm
-
- Super MS/Extra'er
- Posts: 1933
- Joined: Fri May 07, 2004 12:59 pm
- Location: Tacoma, WA
- Contact: